# Question: How Many Amps Will A 4500 Watt 240v Water Heater Element Pull?

## How many amps does a water heater pull?

Q:how many amps does the water heater use.

A: 1650 watts/120 volts= 13.75 amps.

You need a 14 gauge or larger (12 gauge) wire and a 15 amp breaker for the heater..

## What size breaker do I need for a 5000 watt heater?

Table of wire and circuit breaker sizes for selected residential water heaters (W)No.Water heater element power (W)Minimum Wire gauge (AWG)53,0001564,0002074,5002085,000254 more rows•Jul 15, 2020

## Can a 240v heater run on 120v?

Installing a 240-volt heater on a 120-volt circuit is not as big a safety risk, but you will notice that your heater will fail to work most times. When it does run, it will end up giving out much less heat than what you needed for your room and below what you expected.

## How many amps does a 10kw heater pull?

41.6 ampsKeeping this in view, how many amps does a 10kw heater pull? 10,000 watts divided by 240 is 41.6 amps.

## Is a double pole 30 amp breaker 60 amps?

A main breaker is a large-amperage double breaker, same as any double breaker in the breaker box, except it supplies power to each busbar. So your question is like asking if you can draw 60 amps off a 30 amp double breaker … the answer is NO.

## What size breaker do I need for a 40 gallon electric water heater?

Your average residential 30 or 40 gallon water heater is 4500 watts and usually goes on a 30 A breaker.

## What size breaker do I need for a 4500 watt water heater?

A 4500-watt element requires 10/2 wire and a 30 amp (220volt) breaker. The 3800 can be wired with 12/2 wire and a 20 amp breaker.

## What size breaker do I need for a 240 volt water heater?

Electric water heaters require a 240-volt dedicated circuit, which serves only the water heater and no other appliances or devices. The circuit wiring typically includes a 30-amp double-pole breaker and 10-2 non-metallic (NM) or MC cable.

## What size breaker do I need for a 10000 watt heater?

60A breakerRe: Wiring 10,000 watt heater You need #6Cu with a 60A breaker.

## How many amps does a 40 gallon electric water heater draw?

Bottom line, For a 4500w heater w/240v it will draw 4500/240 or 18.75 amps so #10 wire and either 25 or 30 amp breaker, depending on code.

## What size breaker do I need for a 3500 watt water heater?

-> The 3500 watt element is shown using a minimum 20 amp rated circuit (#12 AWG copper shown) for a 240 volt circuit with a 20 amp overcurrent device (breaker).

## How many amps is 4500 watts at 240 volts?

18.75 ampsIn an electric circuit of 240 volts, 4500 watts is equivalent to 18.75 amps.